Edit
  
  
  
  
Content
  
 2/27/2017 1:00 PM13:002/27/2017

​Introductions

2/27/2017
 2/27/2017 1:00 PM13:002/27/2017Elaine McCluskey

​LBNF and DUNE CAD Integration Goals

The goal of integrating separate CAD models and designs is to have latest versions of CAD models available to everyone in a common format useable to everyone so that

  -Clashes and interferences can found and resolved

  -Designs can be coordinated

  -Installation/construction sequences can be planned.

CAD integration as shown in the figure is aimed at coordination, not necessarily producing construction/installation drawings.


2/27/2017
 2/27/2017 1:00 PM13:002/27/2017Elaine McCluskey

​Overview of Far Site CAD Integration Process

  • Today's Focus on FD=>Cryostat/Mezzanine/Prox Cryo=>Fermilab Integration and Model/View Outputs (Figure 1==>)
  • Team working on integration process

se process.PNG

2/27/2017
 2/27/2017 1:00 PM13:002/27/2017Jack Fowler

​CAD Roles/Responsibilities for this Integration Segment

2/27/2017
 2/27/2017 1:00 PM13:002/27/2017

​What is Being Done Today

2/27/2017
 2/27/2017 1:00 PM13:002/27/2017

​Discussion of What is Needed to Accomplish the Integration (Notes on White Board)

  • CAD Formats & Translations
  • Transfer Process
  • Data Storage (including who retains record information through fab/construction/installation/operations)
  • Publication of Models (what format, where, how often)
  • Publication of Views (what format, where, how often)
  • How to Make Information Regularly Available and Keep Configuration Control (including where to display it for easy reference by many stakeholders)
  • Sharing of Drawings vs. Models
2/27/2017
 2/27/2017 1:00 PM13:002/27/2017

​Other Topics/Next Steps

2/27/2017
 3/2/2017 1:00 PM13:003/02/2017

​Introductions

3/02/2017
 3/2/2017 1:00 PM13:003/02/2017Elaine McCluskey

​​LBNF and DUNE CAD Integration Goals

3/02/2017
 3/2/2017 1:00 PM13:003/02/2017Elaine McCluskey

​Overview of the Far Site CAD Integration Process

Team working on integration process:

se process.PNG

  • Today's Focus on FSCF A/E=>Fermilab Integration + Other Cry Systems=>Fermilab Integration + Model/View Outputs (Figure 2==>)
3/02/2017
 3/2/2017 1:00 PM13:003/02/2017David Montanari/Josh Willhite

​CAD Roles/Responsibilities for this Segment

3/02/2017
 3/2/2017 1:00 PM13:003/02/2017

​What Integration Processes Are Being Done Today

3/02/2017
 3/2/2017 1:00 PM13:003/02/2017

​Discussion of What is Needed to Accomplish the Integration (Notes on White Board)

  • Describe What Was Discussed on 27 February (Jack Fowler)
  • CAD Formats & Translations
  • Transfer Process
  • Data Storage (including who retains record information through fab/construction/installation/operations)
  • Publication of Models (what format, where, how often)
  • Publication of Views (what format, where, how often)
  • How to Make Information Regularly Available and Keep Configuration Control (including where to display it for easy reference by many stakeholders)
  • Sharing of Drawings vs. Models
3/02/2017
 3/2/2017 1:00 PM13:003/02/2017

​Other Topics/Next Steps

- 4850L grid layout

4850L LBNF Complex Grid-20170302.pdf

3/02/2017